Tripod and Wall Screens: Model C
 

Model B with CSR (Controlled Screen Return)
Specification Data     Installation Manual
 
 
When Ordering Make Appropriate Selections:
1. Select Size from this chart
Dimensions
Sizes H x W Cm Overall length of case Cm Between Hanger Eyes Cm Shipping wt. lbs. Kg
*70" x 70" 178 x 178 73" 186 72" 184 17 7.71
*64" x 84" 160 x 213 87" 222 86" 220 24 10.89
84" x 84" 213 x 213 87" 222 86" 220 25 11.79
72" x 96" 183 x 244 99" 252 98" 251 28 12.7
96" x 96" 244 x 244 99" 252 98" 251 30 13.61
Video Formats
Viewing Area H x W Cm Nominal Diagonal Cm Overall length of case Cm Between Hanger Eyes Cm Shipping wt. lbs. Kg
*57" x 77" 145 x 196 96" 244 87" 222 86" 220 23 10.43
*60" x 80" 152 x 203 100" 254 87" 222 86" 220 24 10.89
*69" x 92" 175 x 234 120" 305 99" 252 98" 251 27 12.25
 
HDTV Formats
Viewing Area H x W Cm Nominal Diagonal Cm Overall length of case Cm Shipping wt. lbs. Kg
45" x 80" 114 x 203 92" 233 87" 221 23 10.43
52" x 92" 132 x 234 106" 269 99" 252 26 11.79

*High Power Sizes that are seamless.
Letterbox formats available upon request.
Overall case length dimensions + 1/4"
Specifications subject to change without notice.
 
 
 
2. Select Viewing Surface
3. Options
  • No. 6, 6" Non-adjustable extension brackets.
  • No. 11, 10" or 14" Non-adjustable extension brackets
  • No. 23, 18 1/4", 20", or 24" Adjustable extension brackets.
  • Tilt-Lock for Keystone Elimination (used with extension brackets).
  • T-Bar Scissors Clip for dropped ceiling.
  • Pull Rod.
  • No Borders (Black masking borders standard).
  • Articulating Arm for sizes up to and including 70" x70".

4. Features

  • Rugged, small to intermediate size screen.
  • Ideal for classrooms and similar locations.
  • Camlok roller system that operates on nylon bearings.

5. Suggested Specifications

__________ projection screens, __________ (H) x __________ (W), wall or ceiling mounting type. To have Glass Beaded, Video SpectraTM 1.5, High Power or Matte White surface with masking borders standard on flame retardant and mildew resistant seamless fabric. To be equipped with Controlled Screen Return (CSR) to control the return speed of the screen surface back into the case. Fabric shall be mounted into a metal Camlok roller system without tape, glue, staples or cords so that fabric may be easily replaced yet cannot be pulled from roller. To have 22 gauge steel octagonal case with flat back design finished with baked enamel and fitted with end caps concealing roller ends with integral bearing surface to support roller and integral brackets for wall mounting by means of slotted screw holes and ceiling mounting by means of powder coated hanger rings. Bottom of screen shall be mounted into a metal strip in a tubular steel slat finished in baked enamel. Ends of the slat shall be protected by heavy-duty plastic caps. Plated steel slat pull shall be attached to slat with screws.

Matte White, Video SpectraTM 1.5 or Glass Beaded: Surfaces with be seamless
High Power: Will be seamless up to and including 6' high.