Model C with CSR (Controlled Screen Return)
Specification Data     Installation Manual
 
 
When Ordering Make Appropriate Selections:
1.
Model C: Specifications

Dimensions
Sizes H x W Cm Overall length of case Cm Between hanger eyes Cm  Shipping wt. lbs. Kg
*50" x 50" 127 x 127 53 1/4" 135 51 3/4" 131 29 13.15
*60" x 60" 152 x 152 63 1/4" 161 61 3/4" 157 34 15.42
*70" x 70" 178 x 178 73 1/4" 186 71 3/4" 182 38 17.24
84" x 84" 213 x 213 87 1/4" 222 85 3/4" 218 44 19.96
*6' x 8' 183 x 244 8' 3 1/4" 252 8' 1 3/4" 248 48 21.77
8' x 8' 244 x 244 8' 3 1/4" 252 8' 1 3/4" 248 50 22.68
7' x 9' 213 x 274 9' 3 1/4" 283 9 '1 3/4" 279 56 25.4
9' x 9' 274 x 274 9' 3 1/4" 283 9' 1 3/4" 279 58 26.31
8' x 10' 244 x 305 10' 3 1/4" 313 10' 1 3/4" 309 63 28.58
10' x 10' 305 x 305 10' 3 1/4" 313 10' 1 3/4" 309 65 29.48
9' x 12' 274 x 366 12' 3 1/4" 374 12' 1 3/4" 370 71 32.21
12' x 12' 366 x 366 12' 3 1/4" 374 12' 1 3/4" 370 79 35.83
 
Video Formats
Viewing Area H x W Cm Nominal Diagonal Cm Overall length of case Cm Between hanger eyes Cm Approx. shipping wt. lbs. Kg
*60" x 80" 152 x 203 100" 254 87 1/4" 222 85 3/4" 218 42 19.05
*69" x 92" 175 x 234 120" 305 99 1/4" 252 97 3/4" 248 50 22.68
87" x 116" 221 x 295 150" 381 123 1/4" 313 121 3/4" 309 58 26.31
105" x 140" 267 x 356 180" 457 147 1/4" 374 145 3/4" 368 69 31.3
   
HDTV Formats
Viewing Area H x W Cm Nominal Diagonal Cm Overall length of case Cm     Approx. shipping wt. lbs. Kg
*52" x 92" 132 x 234 106" 269 99 1/4" 252     49 22.23
*58" x 104" 147 x 264 119" 302 111 1/4" 283     55 24.95
*65" x 116" 165 x 295 133" 338 123 1/4" 313     62 28.12
78" x 139" 198 x 353 159" 404 147 1/4" 374     62 31.3

 

* High Power Sizes that are seamless.
Note:
High Power is available on all sizes up to and including 9' x 12'.
Letterbox formats available upon request.
Overall case length dimensions + 1/4"
Specifications subject to change without notice.
 
2. Select Viewing Surface
3. Options
  • No. 6, 6" Non-adjustable extension brackets.
  • No. 11, 10" or 14" Non-adjustable extension brackets.
  • No Borders (Black masking borders standard).
4. Features
  • Controlled Screen Return (CSR) will allow operator to release screen from the full down position. The screen will "fast travel" to within approximately 2" of the case. The screen will then slow down and coast into the case without damage to the fabric.
  • Largest available manual spring operated projection screen.
5. Suggested Specifications
__________ projection screens, __________ (H) x __________ (W), wall or ceiling mounting type. To have Glass Beaded, Video SpectraTM 1.5, High Power or Matte White surface with masking borders standard on flame retardant and mildew resistant fiberglass fabric, mounted on 3" diameter ball bearing rigid steel spring roller. Fabric to be permanently attached to roller by metal clips on fabric edge being forced into groove in roller. There shall be a clip every 3" along the fabric edge and double clips shall be used on the ends. To have 22 gauge steel case with flat back design finished with baked enamel. To have powder coated steel case end caps concealing roller ends with steel inner plates to support roller and provide added case strength. End caps shall form sturdy brackets for wall or ceiling installations. Bottom of screen shall be formed into pocket holding tubular metal slat. An extruded aluminum saddle with plated steel pull shall be attached to the slat by four screws on each end. The ends of the slat shall be protected by heavy-duty plastic caps. Metal bumper stops padded with sponge rubber, shall be built into case to prevent slat wedging inside case.

Matte White or Glass Beaded: Horizontal seams required when both dimensions exceed 8'.
Video SpectraTM 1.5 and High Power: Available in selected sizes.